Description
Multi-purpose Non-pusher Elastomer Bellows Seal
The Type 2 mechanical seal is available in single, double and balanced arrangements. An outside-mounted spring results in a compact working height that enables it to fit very short stuffing boxes.
Features
California Residents: Proposition 65 Warning
- Fits equipment with confined space requirements and limited seal chamber depths in pumps, mixers, blenders, agitators, compressors and other rotary shaft equipment.
- To absorb both breakout and running torque, the seal is designed with a drive band and drive notches that eliminate overstressing of bellows. Slippage is eliminated, protecting the shaft and sleeve from wear and scoring.
- Automatic adjustment compensates for abnormal shaft-end play and run-out, primary ring wear and equipment tolerances. Axial and radial shaft movement is compensated for with uniform spring pressure.
- Special balancing allows for higher pressure applications, greater operating speeds and lower wear.
- Non-clogging, single-coil spring allows for greater dependability than multiple spring designs, and it will not run foul due to fluid contact.
Parameters
| Temperature Limits |
-40°F to 400°F/-40°C to 205°C (depending on materials used) |
|---|
| Pressure Limits |
Type 2: 420 psi(g)/29 bar(g) |
|---|
Type 2B: 1200 psi(g)/83 bar(g)
| Speed Limits |
Consult specification sheet speed chart. |
|---|
